GoPro Creator Case Organizer System Parts: Modular Inserts

Full product listing at https://www.etsy.com/listing/1612142346 This listing is just for extra and replacement parts.

Looking for a way to organize the cavernous GoPro Creator Case and keep your valuable GoPro equipment organized during travel? Look no further than this Creator Case Organizer System! Made with high-quality materials, this modular system is designed to protect your GoPro camera, mounts, cables, and other accessories from rattling around during transport.

This case organizer system is compatible with the GoPro Hero Creator Case, inside dimensions 205mm x 163mm. See my other listings if you have the smaller 205mm x 90mm case.

This design extends my range of organizers for the smaller Hard Shell case to cope with the additional width and depth of the Creator case.

There are basic storage trays and a growing variety of tailor made trays for specific items. If you don't see what you need, drop me a line and I can usually add what you need very quickly.

A full set includes an Organizer, an Undertray and enough Side Trays to fill the Creator case. This listing is for individual parts only.

How it works for your custom design:

Pick a material. Matt PLA is strong, nice to look at but may warp in a hot car. If you need more heat resistance select PETG

Pick a GoPro Case Organizer. See the links for full details.
- the Original stores a Hero 9-13 camera and has a square accessory tray https://www.etsy.com/listing/1415438287
- the Long stores a Hero 9-13 camera and has a long accessory tray suitable for a Volta tripod. https://www.etsy.com/listing/1508249363
- the Double stores two Hero 9-13 cameras https://www.etsy.com/listing/1509293213
- the DoubleDouble stores two Hero 9-13 cameras and both the old 9-12 charger and the new Hero13 charger. https://www.etsy.com/listing/1857878835
- the MediaMod stores a Hero 9-13 camera in the Media Mod https://www.etsy.com/listing/1532446931 and has a long accessory tray suitable for a Volta tripod.

Pick an Undertray. Storage is 23mm deep:
- ut_basic: single accessory tray. A good place for a power pack!

Now pick your side trays to fill the side tray space.
Designs marked with a * they must be on top as they have custom slots for components that will stick up above the top surface. Pick those first and then fill the space underneath with other trays.

Side Trays 1/3 height. Storage is 20mm deep:
- st_1_3_basic: full length tray
- st_1_3_basic_2: full length tray with two equal storage areas
- st_1_3_basic_3: full length tray with three equal storage areas
- st_23_3_basic: 2/3 length tray
- st_2_3_basic: 1/2 length tray
- st_3_3_basic: 1/3 length tray

Side Trays 1/2 height. Storage is 31mm deep:
- st_23_2_basic: 2/3 length tray
- st_2_2_basic: 1/2 length tray
- st_3_2_basic: 1/3 length tray
* st_3_2_batt8: 1/3 length tray with 8 battery slots

Side Trays 2/3 height. Storage is 42mm deep:
- st_1_23_basic: full length tray
- st_23_23_basic: 2/3 length tray
- st_2_23_basic: 1/2 length tray
- st_3_23_basic: 1/3 length tray
* st_2_23_hero9: 1/2 length, stores Hero 9-13 camera
* st_2_23_mmod9: 1/2 length, stores Hero 9-13 camera in Media Mod
* st_2_23_hero6: 1/2 length, stores GoPro Hero 6
- st_3_23_batt8: 1/3 length tray with 8 battery slots

Side Trays Full Height. Storage is 64mm deep:
- st_23_1_basic: 2/3 length tray
- st_2_1_basic: 1/2 length tray
- st_3_1_basic: 1/3 length tray
* st_2_1_hero9v: 1/2 length tray, stores two Hero 9-13 cameras
* st_2_1_hero9vl: like the st_2_1_hero9v but with the GoPros arranged in an L
* st_23_1_mmodv_hero9v: 2/3 length tray stores one Hero 9-13 camera and another in the Media Mod with a useful accessory tray in between.

This listing is for the organizer inserts ONLY! The camera, case, and accessories are NOT INCLUDED.

This is a craft product and is not endorsed or affiliated in any way with the GoPro company. This seller makes no claims that this product will fully protect your cameras and accessories from damage, theft, the inevitable rise of our robot overlords or make toast.

I print these items to order, and my stock levels and processing times reflect the maximum rate that I can currently print. If I have no backlog when your order comes in I will typically be able to ship the next day, but that is not guaranteed. Customers opting for express shipping will be moved to the front of the print queue.

Demo on YouTube https://youtu.be/MYCnqd-dLo8

The FDM printing process generates products which have a layered surface. I do my best to produce quality prints with a consistent appearance but minor cosmetic blemishes may occur.

I print these from these materials:

PLA: an environmentally-friendly recyclable (#7) bio-plastic that is derived from plant starch. PLA is lightweight, durable and will withstand a lot of wear and tear, but it is not dishwasher safe and colors other than white will fade slightly if left outdoors long-term. The product will become soft if exposed to 60°C/140°F which can happen in a parked car on a hot day. I use a matte finish PLA which I think looks really good.

PETG: a recyclable (#1) thermoplastic similar to PET used in soda bottles. It is stronger and more impact-resistant than PLA and has a higher heat resistance. It has a glossy finish. It will start to warp if exposed to 80°C/176F which is hard to happen in normal use. Avoid the hottest parts of your dishwasher or leaving it on your dashboard in the sun in a closed car in Death Valley in summer...that kind of thing. Your GoPro probably wouldn't be happy there anyway.

While PETG produces a more temperature resistant product than PLA it requires more preparation, is slower to print and requires more labor to produce a good looking finish. This is reflected in the price.